Details introduction
Model | YHZM25 | YHZM35 | YHZM75 | YHZM100 |
Theoretical capacity | 25 | 35 | 75 | 100 |
Concrete mixer | JZM500 | Jzm750 | JZM1500 | JZM2000 |
Aggregate feeding mode | Belt type | Belt type | Belt type | Belt type |
Aggregate batching machine | PLD800 | PLD1200 | PLD2400 | PLD3200 |
Max aggregate diameter(mm) | 60/80 | 60/80 | 60/80 | 60/80 |
Discharge height(m) | 1.1 | 1.3 | 1.3 | 1.3 |
Cement weighing accuracy（%） | ±1 | ±1 | ±1 | ±1 |
Water additive&weighing accuracy（%） | ±1 | ±1 | ±1 | ±1 |
Aggregate weighing accuracy（%） | ±2 | ±2 | ±2 | ±2 |
Total weight (T) | 12 | 13 | 16 | 26 |
Total power（kw)） | 42 | 46 | 67.5 | 77.5 |
Production introduction
YHZM concrete mixing plant, in a mobile unit, integrates batching, aggregate and cement metering, lifting, mixing, water supply, pneumatic and electric control, and mobile transition is very convenient to move. YHZM series benefit easy to operate and portable. Nowadays, it is hot machine in the market in the construction field.
Main features
1 Good aggregate system
The system has four storage bins with screens, which can store four different sizes of sand and gravel. The batching door is controlled by a cylinder. Compared with the belt-type batching structure, it is simpler and more reliable, and will not cause deviations, wear belts and other faults.
2 Classic drum mixer
JZM series is a double-cone, reverse-discharge concrete mixer, with good mixing quality, low noise, stable operation, high productivity and long service life of the mixing drum. The mixing drum is welded with a pair of high and low blades, which form an angle of 500,400 respectively on the axis of the mixing drum. When the mixing drum rotates, the blades carry the materials. Because the blades are inclined inward, the left and right blades make the materials slide in opposite directions while raising and lowering the material, forming a cross flow in the middle, which has a strong stirring effect and achieves an ideal stirring effect.
At the end of the discharge cone of the mixing drum, a pair of spiral blades are welded. When the mixing drum rotates forward, the blade pushes the material to the center; when it reverses, the material is lifted and discharged by the blade, and the material is discharged cleanly and quickly.
3 structure characteristics
Unique water supply lines, automatic water supply system, reduced water time and increased production efficiency by 20-30 %
4 Control System
start mode, simple operation, stable and reliable performance.
5 Water supply system installation
The water supply system consists of a water pump, a throttle valve and a water supply pipe. The throttle valve can adjust the flow, and the water supply is adjusted by the time relay
Advantage
1 Modular system
Modular design,easy to disassemble.
2 Traction mode
Trailer traction, easy to move and walk.
3 No need installation
4 No need foundation
5 Low cost and finish the project
How to start operate
A. After dragging the mixing station to the field with a tractor, shake down the linkage legs on the under frame to prop up the front part of it to separate it from the tractor and drive the tractor away.
B. Lift the rear part with a car crane, and connect the fixed legs with bolts. While shaking down the legs, put down the rear part, so that the whole is stable at the same time, and then the linkage legs are shaken up (even if The fixed outriggers are forced to link the outriggers without force).
C. Remove the fixed support for the transportation of aggregate and cement scale to make the sensor under force.
2. Powder material system
A. Install the cement bin accessories (dust collector, level gauge, arch breaker, butterfly valve) to the cement bin body.
B. Lift the under frame of each cement silo to the designated position (if the bottom is not fixed, measures must be taken to prevent tipping).
C. Connect the cement bin climbing ladder to the cement bin tank.
Delivery pictures
Hot Tags: portable batching plant, China portable batching plant suppliers, manufacturers, self loading concrete machine
