(1) Please do not use the generator of the pneumatic lifting work lamp indoors due to the generation of exhaust gas; it cannot be used in a direct rain environment, and there should be a distance of at least 1 meter when there are flammables around it; Do not smoke when refueling the generator of the lifting mast mobile light tower, and stop the engine before refueling, and do not spill gasoline when refueling;
(2) During the working process, please do not disassemble the lamp of the pneumatic mast mobile light tower, otherwise it may cause electric shock. When disassembling, please make sure that all power has been cut off;
(3) When the lamp of the pneumatic mast mobile light tower is working, it is very hot. Please ensure that there are no flammable or flammable items around the system, and do not put your hands on the lamp to prevent burns;
(4) When replacing the lamp tube of the pneumatic mast mobile light tower, wait for it to cool naturally, open the sticky lamp shell, and use gloves to replace the lamp tube, so as to prevent the fingerprint on the surface of the lamp tube from affecting the service life of the lamp tube;
(5) When the pneumatic lifting cylinder is extended or retracted, do not place your hands or objects at the telescopic point to prevent crushing;
(6) When the lamps of the pneumatic mast mobile light tower work for a long time, it is normal for the lifting cylinder to drop a little, and the lifting lamp pole should be pressurized in time;
(7) When working in an environment such as high-voltage wires, the distance between the lamp panel of the pneumatic mast diesel outdoor light tower and the high-voltage wire is at least 5 meters after it is raised, and it should be reliably grounded in thunderstorms and open places to prevent lightning strikes;
(8) If the lamp of the pneumatic mast diesel outdoor light tower fails, it should be overhauled by professionals or trained personnel. Please do not disassemble it without authorization to prevent injury.
