Trailer Concrete Mixer Pump

EP trailer concrete mixer pump is one type of concrete mixer pump, which offers greater mobility and ease of transportation. These machines are mounted on a trailer, making them easy to move around different job sites as required. The trailer provides a stable base for the equipment, ensuring stability during operation. Trailer concrete mixer pumps are commonly used for small to medium-sized projects, including construction of residential buildings, bridges, and tunnels.

Mixing capacity: Trailer concrete mixer pump has the ability to mix and transport concrete at the same time. The mixing capacity of the pump depends on its size and power, typically ranging from 10 cubic meters per hour to more than 50 cubic meters per hour.

Pumping distance: The trailer concrete mixer with pump can pump concrete over long distances, typically ranging from 100 meters up to 600 meters. The pumping distance varies by model and type of pump.

Regulations: Depending on the country or state, trailer concrete mixer with pumps must comply with specific regulations related to their usage and transport on public roads. These regulations may impact the design and features of the pump.

Maintenance: Regular maintenance is required for concrete mixer with pump trailer to ensure optimal performance and long service life. This includes routine checks, cleaning, and replacement of worn-out parts.

Step 1: Safety Checks

Before starting the machine, ensure to conduct a thorough inspection of the trailer, the engine, and other components. Check oil levels, filter conditions, hydraulic tools, and hoses for any damages, leaks, or defects. Make sure all the parts are functioning correctly, and no loose connections exist.

Step 2: Stabilize the Trailer

Ensure the trailer concrete mixer pump is parked on a stable surface, and the wheels are appropriately supported. A level ground is preferred, and use stabilizers or jacks to keep the trailer steady during the operation.

Step 3: Add Concrete Mixture

After verifying the stability of the trailer, connect the mixer pump hoses, and add the concrete mixture to the tank. Start the mixer, and slowly feed the mixture into the pump.

Step 4: Adjust Pressure & Output Rate

Depending on the requirements, adjust the pump's pressure and output rate accordingly. Ensure to follow the manufacturer's instructions for pressure settings and output rates.

Step 5: Start Pumping

After everything is set, start the concrete mixer with pump trailer by engaging the engine. Observe the mixture flow and adjust the pump settings as required. Use a trowel or screed to level the mixture and compress it properly. Keep a watch on the mixture levels in the tank, and add more if necessary.

The trailer concrete mixer with pump fails to start or stops suddenly during operation.

Fault: Electrical problems or overload.

Solution: Check the wiring and fuses. Reduce the load by adjusting the feeding speed or unloading excess concrete.

The concrete mixer with pump trailer produces low concrete output.

Fault: Clogging or blockages in the conveying system.

Solution: Clean the pipes and hose, and remove any obstructions that may cause blockages.

The machine produces irregular concrete mixes.

Fault: Uneven mixing or improper feeding of materials.

Solution: Check the mixing blades and adjust the feeding rate to ensure even mixing.

Hot Tags: trailer concrete mixer pump, China trailer concrete mixer pump suppliers, manufacturers, concrete mixer pump capacity, , Small Concrete Mixer Pump, concrete mixer water pump, volumetric concrete mixer with pump