Since the concrete will solidify into a hard block in a short time, and it is corrosive to steel and paint, it is necessary for daily maintenance to clean the concrete adhering to the concrete storage tank and the inlet and outlet after each use of the concrete storage tank. Serious work.
These include:
1. Rinse the feeding port with water before each charging to keep the feeding port moist during charging;
2. Fill the cleaning water tank that comes with the vehicle with water at the same time of loading;
3. Rinse the feed port after loading, and clean the residual concrete near the feed port;
4. After unloading at the construction site, flush the discharge chute, and then add 30-40 L of cleaning water to the concrete storage tank; keep the concrete storage tank rotating at a forward and slow speed when the vehicle returns;
5. Remember to discharge the sewage in the concrete storage tank before the next loading;
6. At the end of each day, thoroughly clean the concrete storage tank and around the inlet and outlet to ensure that there is no cement and concrete agglomeration.
Yuchai engine Fenyi axle 16/70-20 Tire
Zhongchuan hydraulic system Computer control Weighing system
Steering wheel Brake Electric button to control hopper
Driver’s cab Seat Shift paddles Fan Hand break
Hot Tags: self loading concrete mixer truck, China self loading concrete mixer truck suppliers, manufacturers
Main parameter of EP 4m3 self-loading concrete mixer
Item | Parameter |
Drum capacity | 6.2m3 |
Concrete output | 4m3 |
Loading ratio | 76% |
Rotary drum | Discharge mouth height 1.8 meters. Level turn 270 ° |
Production capacity | 4 batches in an hour. 16 cubic meters per hour |
Engine | diesel, water cooling, 4 cylinders, 92 KW |
Transmission way | --Full hydraulic drive. --4 wheel drive and 2 turns. --All the power comes from hydraulic oil, including walking 4X4. |
Climbing ability | 30% |
Speed | --Low speed 0-25 km/h, |
CAB | Ultra wide deluxe cab . ROPS type |
Hydraulic system | Open feed, two gear pump participate in action. |
Joystick | A four-way hydraulic pilot with an electric control button controls the bucket. |
Bucket | 650L, hydraulic gate |
Chute | Equipped with two removable shaft pins to increase the discharge length. |
Water supply system | Self-priming hydraulic drive pump/electronic water flow monitor/high pressure washer (optional). |
Brake | Inner wheel brake and the emergency brake operate on 4 wheels, enabling the small servo pump on the independent double-return road.Negative pressure type stop brake, the front bridge is equipped with inner hub. |
Turn | Hydraulic steering, rear wheel steering |
Tyre | 16/70-20 wire tires |
Power system | 24V |
OIL TANK/water tank | 2 x210L water tank. |
Diesel tank | 125L |
Hydraulic tank | 130L |
Weight | 8700KG |
Dimension(L*W*H) | 7500x2700x4830mm |
Wheelbase | 2350mm |
Remarks:
Technical data may change due to technical progress. Be subject to modification without notice.
