Introduction
Drum Type Hot Mix Plant includes a base, a motor, a transmission device, a cylinder, a main shaft, bearings at both ends, a feed hopper, a discharge port, several spokes that connect the cylinder and the main shaft, and high and low stirring materials installed in the cylinder, knife and discharge blade. The main shaft is a hollow shaft, and the two ends of the hollow shaft are respectively provided with an inlet end connecting plate and an air outlet end connecting plate, and a jacket is also fixedly connected outside the cylinder. The spokes at both ends are hollow tubes. All hollow tubes communicate with the inner cavity of the jacket and the inner hole of the main shaft. At least one blocking plate is arranged in the inner hole of the main shaft between the hollow tubes at both ends. It not only realizes stirring but also has heating function, which improves the production efficiency.
Advantages
The drying drum of the Drum Type Hot Mix Plant adopts double-layer insulation, which is an internationally renowned reducer-driven drying and heating drum. Its dryer outlet is equipped with a temperature measuring device to control the temperature regularly. The company's patented lifting blades are added to the dryer, which has high efficiency and uniform heating, and can be used in drum-type hot mixing equipment.
Drum Type Hot Mix Plant adopts a green and environmentally friendly design, using a first-class inertial dust plus two-stage bag filter system and a negative pressure dustproof design for the building, while controlling dust emissions, acid emissions and noise aspects.
maintain
Dry drum mixing is an important part of drum hot mixing equipment. It can evenly heat all kinds of aggregates to a certain temperature and send them into the hot aggregate elevator from the discharge port. In order to use it better and prolong its service life, we should
1. Check whether the serrated wrench, scraper, and guide plate are open for welding every week;
2. Adjust the contact between the idler and the idler in time to ensure that the contact surface is greater than 2/3;
3. The gear oil should be replaced after three months of continuous production of the reducer.
The machine in Customer Job site!
Hot Tags: drum type hot mix plant, China drum type hot mix plant suppliers, manufacturers
